Rockfort Fosgate Punch 600 Watt 4-Channel Amplifier P600X4
479,00 €
Technical Specifications:
Number of Channels | 4 |
Total Power(Sum of Rated Power) | 600 Watts |
Rated Power(RMS Continuous Power) | 75 Watts x 4 @ 4-Ohm 150 Watts x 4 @ 2-Ohm 300 Watts x 2 @ 4-Ohm Bridged |
Dynamic Power(PVC/PowerCube®) | 129 Watts x 4 @ 4-Ohms 0° Res 211 Watts x 4 @ 2-Ohms 0° Res |
Bridgeable | Yes |
Frequency Response | 20Hz to 20kHz +/- 1.0dB |
Input Sensitivity | 150 mV – 12 V |
Circuit Topology Class | Class A/B |
Efficiency (average) | 68% @ 4-Ohm |
Total Harmonic Distortion (THD+Noise) | 4-Ohm: <1.0% 2-Ohm: <1.0% |
Signal Input | Hi/Low level: 2 RCA pair |
Signal Output | Low level: 1 RCA pair |
Tone Controls | Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz Function depends upon LP/AP/HP switch position |
Crossover Controls | Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth All-Pass: Yes |
Remote Controls | Optional Punch Level Control (PLC2) Ready |
Visual Indicators | Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD |
Power Wire Gauge | 4 AWG |
Power Input Connector | Captive C-Clamp |
Speaker Wire Gauge | 8 AWG to 18 AWG |
Speaker Output Connector | Captive C-Clamp |
Cooling | Convection |
Operating Voltage | 9 – 16 VDC |
Recommended Fuse(not included) | 100 A |
Average Current Draw (13.8V Music) | 45 A |
Max. Current Draw (13.8V Sinewave) | 90 A |
Suggested Alternator | 75 A |
Dimensions (H x W x D) | 2.38 x 7.76 x 13.28 (in) 6.05 x 19.71 x 33.73 (cm) |
Shipping Weight | 12.8 Lbs. (5.80 Kg.) |
- Description
- Reviews (0)
- PDF MANUAL
Description
The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.
Be the first to review “Rockfort Fosgate Punch 600 Watt 4-Channel Amplifier P600X4”
You must be logged in to post a review.
Reviews
There are no reviews yet.